注册登录
0.5Ω 双 SPDT 双向模拟开关TS3A5223 是一款高速双路模拟开关,此开关具有先开后合以及双向信号切换功能。 TS3A5223 可被用作一个双路 2:1 复用器或者一个 1:2 双路去复用器。
具有三态输出的单电源单缓冲器闸 CMOS 逻辑电平转换器SN74LV1T126 是一款具有较宽电压范围的低压 CMOS 门逻辑电路,用于工业、便携、电信和汽车应用。 输出电平以电源电压为基准,并且能够支持 1.8V/2.5V/3.3V/5V CMOS 电平。
适用于漏极开路和推挽应用的 4 位双向多电压电平转换器LSF 系列是工作电压介于 1.0V 至 4.5V (Vref_A) 和 1.8V 至 5.5V (Vref_B) 之间的双向电压电平转换器。 此器件在无需方向端子的条件下便可在开漏或推挽应用中实现 1.0V 至 5.0V 的双向电压转换。 对于采用 15pF 电容器和 165Ω 上拉电阻器的开漏系统,LSF 系列支持传输速度大于 100MHz 电平转换应用。
具有逻辑侧独立电源引脚的 RS-232 收发器The TRS3253E device is a three-driver and five-receiver RS-232 interface device, with split supply pins for mixed-signal operations without needing an external voltage translator. All RS-232 inputs and outputs are protected to ±8 kV using the IEC 61000-4-2 Air-Gap Discharge method, ±8 kV using the IEC 61000-4-2 Contact Discharge method, and ±15 kV using the Human Body Model. The charge pump requires only four capacitors for op
Automotive Catalog 3-V to 5.5-V Multichannel RS-232 Line Driver/Receiver With +/-15-kV ESD ProtectioThe TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. 
具有 +/-15kV ESD 的汽车类 3V 至 5.5V 多通道 RS-232 线路驱动器/接收器
具有 +/-15kV ESD 保护的 3V 至 5.5V 多通道 RS-232 线路驱动器/接收器The MAX3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. 
诚博娱乐